This file was created to help facilitate data re-use. If any further information is needed please contact philipp.preinstorfer@tuwien.ac.at 1. Methodological information: o Description of methods used for data collection and generation The data was collected while conducting uniaxial tensile tests on textile-reinforced concrete with varying concrete cover and surface finish. The load was applied displacement controlled using a universal hydraulic testing machine. Data that comes from that machine is the applied displacement and measured load Deformations of the specimens were measured using digital image correlation on the front and side of the specimens. o Description of methods used for data processing The DIC measurements were processed with GOM correlate 2019. For every specimen the strains were computed for the front and the side of the specimens. Measurments were taken in the program and exported as a .csv file: Front surface - front length of specimen measured in the middle of the specimen (Fläche) - crack widht of every crack on the front surface (Fläche Rissbreiten) - strain profile in longitudinal direction the middle of the front surface right before failure (Fläche Schnitt) Side surface - strain profile in longitudinal direction right before failure measured 5 mm from top (Kante Längsschnitt 1 oben) and 5 mm from bottom (Kante Längsschnitt 2 unten) - length of specimen measured 5 mm from top and bottom of the side surface (Kante Längsschnitte Kurvenlänge) - measured deformation every 8 mm in transverse direction to detect splitting cracks (Kante Multischnitt Kurvenlänge) o software or instrument-specific information to process and merge the csv.output from the DIC measurements and the testing machine Matlab was used. The merged and condensed data is stored as 00_data_all.csv in this dataset o Definitions of codes and symbols The data for every specimen are numbered according to the sequence of testing. The number and day of testing is given as prefix in the extracted data from the DIC measurements. 2. Data-specific information: o Count of number of variables, and number of cases or rows A total number of 144 specimens were tested (144 rows in 00_data_all.csv). o Variable list, including full names and definitions (spell out abbreviated words) of column headings specimen_nr (numbered according to the sequence of testing) concrete_cover fibre_cross_sectional_area direction (weft or warp direction; Schuss = Weft, Kett = Warp) d_abb (abbraviation for Weft = S and Warp = K) surface_finish (sand coated = besandet, plain = unbesandet) sf_abb (abbraviation for sand coated = B, plain = UB) specimen_label (number of testing - concrete cover - fibre_cross sectional area - d_abb - sf_abb) WolperNr (output labelling of hydraulic testing machine) date (date of testing) time1 (start of testing with hydraulic maching) and time2 (start of DIC measurements). Only given if any time delay occured b (width of specimen) t (thickness of specimen) Ac (concrete cross-sectional area) Af (fibre strand cross sectional area, including matrix) age (at testing) fcm (mean concrete compressive strength, cubic) fct (mean concrete tensile strength, tested on prismns 40x40x160 mm) Ecm (Youngs modulus concrete, tested on prismns 40x40x160 mm) number_of_tested_fibre_strands cross_section_area_per_fibre_strand perimeter_per_fibre_strand fibre_cross_sectional_area_per_specimen Tensile_strength_textile_manufacturer Youngs_modulus_textile_manufacturer Tensile_strength_textile_tested breaking_strain_textile_tested Youngs_modulus_textile_tested Breaking_force_per_fibre_strand Breaking_force_per_textile Breaking_Force_tested Ffu_Fu (relation of breaking strength textile to measured breaking force of the specimens) time_at_first_cracking Load_at_first_cracking time_at_first_splitting Load_at_first_splitting crack_width_at_first_splitting number_of_cracks Crack_distance_mean Crack_distance_std (standard deviation) wcr10kN wcr15kN wcr20kN wcr25kN wcr30kN wcr35kN wcr40kN (mean crack width at load stages 10-40 kN) wcr10kNstd wcr15kNstd wcr20kNstd wcr25kNstd wcr30kNstd wcr35kNstd wcr40kNstd (standard deviation of crack width at load stages 10-40 kN) o Units of measurement sec, mm, mm², MPa and kN o Definitions for codes or symbols used to record missing data For missing data or data exluded from the dataset NaN was used o Specialized formats or other abbreviations used decimal sepeartor .